Power your OGO™ ORIGIN using standard household outlets or solar systems—safely, efficiently, and without the guesswork.
The OGO™ ORIGIN runs on a 12V DC system—but that doesn’t mean you need a solar rig or RV battery to power it. If you’re using your unit in a home, cabin, or off-grid structure with standard wall outlets, you can connect it directly with the right power adapter.
Here’s exactly what you need.
The Adapter You Need
To safely power your OGO™ ORIGIN from a standard 110V AC outlet, you’ll need an AC-to-DC power adapter that matches these specifications:
-
Output Voltage: 12V DC
-
Current Rating: Up to 10 Amps (120W max)
-
Polarity: Center-positive
-
Plug Size: 5.5mm x 2.5mm barrel connector
These specs are critical—using an adapter outside of this range can result in underperformance, electrical issues, or damage to the unit.
The Adapter We Recommend
We use and resell the ALITOVE 12V 10A Power Supply Adapter, which we’ve tested extensively with the OGO™ ORIGIN. It delivers stable, consistent power and meets all technical requirements.
-
Converts 100–240V AC to 12V DC
-
Delivers up to 10A
-
Plug: 5.5mm x 2.5mm with center-positive polarity
-
Compact, reliable, and ready to use
🛒 Buy the OGO™ Power Adapter »
Can You Use a Different Adapter?
Yes—but with caution.
You’re not required to purchase from us, but we only guarantee compatibility and performance with the adapter we provide. If you choose to use a third-party option, make absolutely sure it meets the correct:
-
Voltage (12V DC)
-
Amperage (9–10A minimum)
-
Polarity (center-positive)
-
Plug size (5.5mm x 2.5mm)
The wrong adapter can lead to:
-
Motor issues
-
Timer failure
-
Underpowered performance
-
Risk of permanent damage
Why the Right Adapter Matters
Your OGO™ ORIGIN is powered by a 12V motor, a continuous ventilation fan, and a capacitive sensor system. Stable, clean power is essential to ensure:
-
Agitation cycles run smoothly
-
Sensors function accurately
-
The fan operates quietly and continuously
-
All systems are protected from overload or miswiring
It’s a small part of the system—but it keeps everything else running right.
Final Word
If you want to power your OGO™ ORIGIN from a standard wall outlet, the right adapter makes it possible. No wiring, no guesswork—just plug in and go.
Use the adapter we recommend for guaranteed compatibility, or source your own using the exact specs above.
One adapter. Full performance. Simple setup.
Need help? Reach out—we’re here to get you powered up.