Sometimes the drawer latch gets damaged in shipping and may need to be replaced. Please contact customer care at sales@ogotoilet.com if you need assistance.
Tools You’ll Need
-
5/64" Allen wrench
-
5/16" wrench or socket for the lock nut
-
A replacement latch ( Contact Us )
Step-by-Step Instructions
1. Remove the Old Latch
-
Use the 5/64" Allen wrench to loosen the bolt from the front of the latch.
-
Hold the lock nut on the back with your 5/16" wrench while you unscrew.
-
Once the bolt is out, remove the latch and set the hardware aside (or discard if you’re replacing both latch and hardware).
2. Install the New Latch
-
Align the new latch with the existing hole in the drawer face.
-
Reinsert the bolt through the latch and secure it with the 5/16" lock nut on the back.
-
Tighten until snug—but don’t overtighten. The latch should be secure but still able to move freely when operated.
Pro Tip: A little tight is better than too loose, but if it’s too tight to move, back it off just a touch.
Done and Ready
Just like that, your OGO™ ORIGIN drawer latch is as good as new—solid, functional, and ready to lock in your composting confidence.